Our Conduit Spacers are designed to suit 100, 125, 150mm and 200mm Conduit.
- designed to accommodate either light or heavy duty standard conduits
- allow various conduit sizes together in the same trench
- quick pre-assembly outside of trench
- spacers lock together using the unique locking lugs to form a matrix
- the matrix can be customised on site to suit the particular application
- minimum 50mm separation between conduits by design
- vary separation as desired during assembly
The Spacer Company Trenchless Bore Spacer allows telecommunications and power utilities to quickly and easily install conduit underground beneath structures such as roads and railways. The Trenchless Bore Spacer is designed to support the bundles of conduit throughout the installation process.
Each Trenchless Bore Spacer is custom designed and cut in house using our own CNC Router. A baffle can be cut using our light weight PVC Celluka or our NEW Super tough 100% recycled Polyethylene Board.
The Spacer Company Baffle Spacer allows you to customise the trench or duct layout for applications that may not be possible with our Standard Conduit Spacer range.
You can supply your own CAD data in DXF format or have our team provide you with a design to suit your application.
Spacer Company Baffles are CNC Machined using 15mm thick PVC Sheet.
The hold down spacer system has been developed to provide a means of preventing conduits from floating as the flowable fill is being poured into the trench.
Using Acro props and removable adjustable poles – the Acro props straddle the trench supporting poles which provide downward pressure on the bank of conduits.
The system avoids the use of stakes or heavy concrete blocks and the only item left in the trench is a small plastic fitting.
The Spacer Company manufacture a range of Bed Plugs used to blank previously use holes in a variety of PreCast Applications. Un-used holes in PreCast moulds can be troublesome and time consuming to fill. Previously welding and grinding of a hole was required which often provided unsatisfactory results. Using a Polymer Bed Plug solves this issue. Each Bed Plug is designed to be driven into a hole and the excess is simply snapped off using a hammer and wood chisel leaving a clean inner face to the mould.
The Bag-O-Crete system helps to provide a simple and efficient method of constructing retaining walls in situations such as Flood Mitigation, Creek Washouts and Bridge Abutments.
The system provides an easy-to-assemble frame used for supporting the Polybag to mould each concrete block in situ.