Find a Distributor
07 3376 2333

Are the Conduit Spacers difficult to assemble

Assembly instructions are included with The Conduit Spacers. These instructions can also be downloaded here.

Can the spacer be used for plumbing AND electrical?

Can the spacer be used for plumbing AND electrical?

Yes, we have seen a project in QLD where the spacer was used for PVC Conduit and Galvanised Steel pipes

How far apart should I place each conduit spacer frame?

How far apart should I place each conduit spacer frame?

To help maintain correct Conduit-to Conduit spacing. We recommend placing each Conduit Spacer frame every 2 to 3 metres.

Will the conduit spacers stop the conduit from floating

Will the conduit spacers stop the conduit from floating
The Conduit Spacers are not designed to prevent floating of conduit nor should they be used to anchor conduit. In the case of flowable backfill you may prefer to backfill fill in stages or use one of the following methods
  • Tie the conduit arrangement down to a concrete base
  • Tie the conduit arrangement down to adjacent stakes driven into the ground
  • Use one of our Conduit Hold down products in conjunction with suitable frame work to support the conduit from above. (as seen in image )

What are the conduit spacers made from?

What are the conduit spacers made from?

The Click-together Conduit Spacers are made from 100% Recycled Polypropylene

What are the Custom Baffle Spacers made from?

What are the Custom Baffle Spacers made from?
The Custom Baffle Spacers are made from either 15mm PVC Sheeting (Celluka) or 12mm Super tough 12mm Recycled High Density Polyethylene.

Are the conduit spacers approved for use on my job site?

Written approval has been given by Energex in QLD. Other electrical authorities such as Endeavour Energy, Ausgrid, Ergon and Western Power have either used our Conduit Spacers or advised that our product does not require specific approval.

How do I know which conduit spacers I need?

As a guide there is a SPACER CALCULATOR on our website. In most cases it is best to contact us directly to ensure you are quoted the correct combination of products for your project.

How much will transport costs add to my order?

As a guide there is a FREIGHT CALCULATOR on our website. We pass on Freight charges at COST. If you prefer you may choose to arrange your own freight or pickup from the factory in Sumner Park QLD

What are Spacer Blocks used for?

What are Spacer Blocks used for?
The Spacer Blocks can be used to increase the CONDUIT-TO-CONDUIT spacing. Available in 20mm, 25mm and 50mm these stackable blocks help ensure you can build a frame to suit the requirements of a project.

I don’t want to assemble these myself. Will The Spacer Company assemble Conduit Spacers for me?

 I don’t want to assemble these myself. Will The Spacer Company assemble Conduit Spacers for me?
Yes, we have had great success offering a PARTLY PRE-ASSEMBLED Conduit Spacer saving valuable time on-site.

Does the Spacer Company make a product to help hold conduits down?

Does the Spacer Company make a product to help hold conduits down?
Yes, we offer 2 CONDUIT HOLD DOWN products which can assist with securing the Conduit down to resist floating.

Can I buy Conduit Spacers direct from the manufacturer?

From July 1st 2015 The Spacer Company will cease selling product to all pre-existing accounts.

The Spacer Company products will only be available through a network of Electrical Wholesalers throughout Australia.

Can I purchase ½ bags of Conduit Spacers?

Conduit Spacer products are sold in minimum bag quantities.

How many Conduit Spacers come in a bag or pallet?

View our brochure or visit this page for a full listing of bag/pallet quantities

Where are the Conduit Spacers made?

The Conduit Spacer products are designed and manufactured in Brisbane, Australia.

Is the Conduit Spacer product patented?

Yes, the click-together Conduit Spacers are protected by a Patent.

Can I store Conduit Spacers outside?

We recommend storing Conduit Spacers out of direct sunlight to avoid damage to packaging and to maintain the integrity of the flexing locks of the Conduit Spacers

Can I return un-used conduit spacers for credit?

Contact your place of purchase to discuss credit. The Spacer Company Click here for our Returns Policy for distributors.

I need a custom Conduit Spacer. Can the Spacer Company help with this?

The Spacer Company can provide a Custom Conduit Spacer or Baffle as required. Contact us with details of your project and we will supply a CAD image of the proposed Spacer.

1 2

I need help with a Bore Spacer for Trenchless Ducting. Can the Spacer Company help with this?

The Spacer Company can provide Bore Spacers to be used in Trenchless or Underground Bore applications.

Contact us with details of your project and we will supply a CAD image of the proposed Bore Spacer.

3 4

Does the Spacer Company just manufacture Conduit Spacers or can they offer assistance on a larger scale?

Does the Spacer Company just manufacture Conduit Spacers or can they offer assistance on a larger scale?

The Spacer Company designed and constructed almost 800 8 metre long Conduit Modules for a Twin Tunnel project in Brisbane.  The module was designed to allow positioning of up to 43 Conduits into the tunnel in a single lift.

For more information on this project click here.

Baffle Site Pic 1

bm3

Thiess4

DSC00898wtmk

Thiess9